Boss AC-3 Acoustic Simulator Pedal

The Boss AC3 Acoustic Simulator Compact Pedal for Electric Guitar. Advanced electric-to-acoustic guitar modelling.

The Boss AC3 is a perfect solution when you wished you had brought your acoustic along when you are on stage or in the studio. This new-generation compact pedal employs COSM modelling technology to transform any electric guitar into a variety of beautiful acoustic guitars. BOSS's COSM Acoustic-Modelling technology is beautifully showcased in this small but powerful pedal, which simulates an acoustic guitar much more precisely and realistically than previous technology allowed. Derived from BOSS top-of-the-line AD-8, the AC-3 simulates the sound of an acoustic guitar with incredible precision. Four simulation modes are provided: Standard, Jumbo, Enhanced, and Piezo-equipped; the latter supplies that famous "cut through the mix" direct piezo sound. Previous compact acoustic-guitar modelling-pedals were promising, but now the bar has been raised with AC-3. The AC3 provides fine control. Top and Body controls are provided, which allow you to shape the characteristics of the four acoustic models. Create the perfect acoustic-guitar sound quickly and easily with simple knob twists. Add depth and sweetness to the sound with the AC-3's built in digital reverb. It's like getting two pedals in one! Two sets of outputs are provided, allowing you to connect the AC-3 to a standard guitar amp and to a direct input device such as a PA, or a recorder.

The main features of the BOSS AC3 include:

• BOSS's most advanced acoustic-guitar modeling in a compact pedal


• Four simulation modes: Standard, Jumbo, Enhanced, and Piezo-equipped


• Top and Body knobs for fine-tuning the virtual-body resonance


• Built-in reverb, optimised for acoustic-guitar simulation


• Versatile Output Paths

Boss AW-3 Auto Wah Pedal

The BOSS AW3 Auto Wah Compact Pedal for Guitar. Classic wah effects for your electric or bass guitar.

The BOSS AW3 Dynamic Wah pedal gives guitarists a wide range of classic auto-wah and dynamic wah effects. Plus a new Humanizer effect which can simulate human vowel sounds. A Bass input provides a variety of funky wah sounds for bass guitar. The AW-3 Dynamic Wah is the first compact wah pedal to incorporate human voice-type sounds through a Humanizer Mode. Of course, you can also choose from standard up-and-down wah effects, plus a Tempo Mode and resonant synth-like Sharp Mode. Choose from both fixed and auto wah settings using the Manual control or pedal for tempo input. By connecting an optional expression pedal, the AW-3 can also be used for Pedal Wah effects.

The main features of the BOSS AW3 include:

• AW-3 Compact pedal creates a variety of classic wah effects


• Dynamic wah sounds provide variable effect based on picking strength


• Humanizer effect creates human voice-type vowel sounds


• Dedicated electric guitar input for processing electric guitar


• Dedicated bass guitar input for processing bass guitar


• EXP Pedal mode allows wah control via optional expression pedal


• Tempo can be set for pedal control or at fixed rate via Manual mode


• BOSS 5-year warranty

Boss BCB-30 Pedal Board

The Boss BCB-30 Pedal Board is a convenient way to set up and transport all your compact effects.

The Boss BCB-30 Pedal Board features a unique padded interior can be customized to fit a range of gear, while a convenient AC adaptor supplies power for up to seven devices.

The Boss BCB-30 Pedal Board Main Features Include:

• Lightweight pedal board for transporting a range of compact pedals and effects


• Padded interior can be customized to fit anything from a compact pedal to Twin Pedal


• Exterior made of tough, molded resin

Boss BCB-60 Pedalboard Including Power Supply

The Boss BCB60 Pedal Board including power supply. A great way to transport, set up and power your effects pedals.

The Boss BCB60 Pedal Board is a convenient way to set up and carry all your compact effects. The unique padded interior can be customized to fit a wide range of gear including Boss compact and Twin pedals and most other stompbox manufacturers' models. A convenient AC adaptor supplies power for up to seven devices.

The main features of the Boss BCB60 include:

• A great way to transport, set up and power your effects pedals


• Lightweight pedal board for transporting a range of compact pedals and effects


• Padded interior can be customized to fit compact pedals, Twin Pedals and even wahs


• Exterior made of tough, molded resin designed to withstand heavy impact


• Onboard 1,000mA AC adaptor (to 9V DC) for powering up to 7 devices compatible with BOSS PSA and ACA adaptors.; includes all cabling

Boss BD-2 Blues Driver Pedal

The Boss BD2 Blues Driver Pedal. Delivers the creamy, yet crunchy sound associated with great blues guitar.

The Boss BD2 is a classic, bluesy vintage tube amp in a compact effects pedal. Whether it's warm and mild natural overdrive sound to full-blown distortion with plenty of gain, the BD-2 leaves the expressiveness of your guitar and subtle nuances of your playing style intact. Instant access to the kind of warm overdrive and emotive distortion usually reserved for 30-year-old tube amps.

The main features of the Boss BD2 include:

• Delivers the creamy, yet crunchy sound associated with great blues guitar


• Controls: Level, Tone, Gain


• Connectors: Input, Output, AC Adaptor


• Current Draw: 13 mA (DC 9V)


• Weight: 400g (15 oz.)


• 9 Volt battery or mains powered, neither included


• Recommended AC Adaptor: PSA Series

Boss BF-3 Flanger Pedal

Building on the 20-year legacy of the famous Boss BF2, the new Boss BF3 Flanger pedal gives guitarists and bassists an updated version of the classic Boss flanger with the thickest stereo flanging sounds ever. Two new modes (Ultra and Gate/Pan-) create stereo flanging with incredible depth-even Slicer-type effects and sounds that seem to "swirl" around the listener. An instant classic.

The main features of the Boss BF3 include:

• BOSS' best flanging effects in a compact pedal


• New Ultra and Gate/Pan modes for ultra-fat flanging with very low noise


• Momentary mode turns flanging on instantly


• Tap tempo adjustable via pedal


• Independent Guitar and Bass inputs and stereo outputs

Specifications

• Controls: Res, Manual, Depth, Rate, 4-way Mode Switch


• Connectors: Guitar Input, Bass Input, Output A, Output B, AC Adaptor


• Current Draw: 40 mA (DC 9V)


• Weight: 420g / 15 oz (including battery)


• Nominal Input Level: -20dBu


• Input Impedance: 1MOhm


• Nominal Output Level: -20dBu


• Output Impedance: 1kOhm


• Residual Noise Level: -95dBu (IHF-A weighted, typ.)


• Recommended Load Impedance: 10kOhm or greater


• Delay Time: 0.3 ms - 14.4 ms (Guitar In), 0.3 ms - 6.3 ms (Bass In)


• LFO Speed: 100 ms -18 s


• Recommended AC Adaptor: PSA Series

Boss CE-20 Chorus Ensemble Pedal

The BOSS CE-20 CHORUS ENSEMBLE Guitar Effects Pedal, Chorus Twin Pedal. BOSS' Ultimate Chorus Pedal is versatile, rich and creative for electric, electro-acoustic and bass Guitar.

The BOSS CE-20 CHORUS ENSEMBLE is the culmination of over 25 years of BOSS chorus experience. The Boss CE20 programmable chorus pedal not only models classics like the CE-1 and SDD-320, but creates entirely new effects including chorus for bass and acoustic guitar. New "Brilliance" and "Ambience" knobs offer unprecedented realtime control over the chorus tone-making the CE-20 a pedal no guitarist should be without.

The main features of the Boss CE-20 CHORUS ENSEMBLE include:

• BOSS' Ultimate Chorus Pedal is versatile, rich and creative for electric, electro-acoustic and bass Guitar


• BOSS' finest chorus effects ever offered in a compact pedal


• 6 chorus modes: Rich, Bass, Acoustic, Standard, CE-1 and Dimensional D


• Brilliance parameter adjusts "sparkling" feel of chorus


• Ambience control adds reverberation to chorus for greater spaciousness


• 4 User memories with pedal recall


• Stereo In/Out and Headphone output


• Memories 4


• Nominal Input Level - GUITAR/BASS: -20 dBu. GUITAR AMP, SEND/RETURN: +4 dBu


• Nominal Output Level - GUITAR/BASS: -20 dBu. GUITAR AMP, SEND/RETURN: +4 dBu


• Residual Noise Level: -93 dBu or less (IHF-A typ.)


• Power Supply - DC 9V: Dry Battery x 6 AA/R6/LR6 (included), AC adaptor (PSA Series - not included))


• Current draw: 160 mA (9V max.)


• Width 173 mm, 6-13/16 inches


• Depth 158 mm, 6-1/4 inches


• Height 57 mm, 2-1/4 inches


• Weight 1.1 kg, 2 lbs. 7 oz


• BOSS 5-year warranty

Boss CE-5 Chorus Ensemble Pedal

The BOSS CE5 Chorus Ensemble is BOSS' definitive compact chorus pedal, covering a wide frequency range and featuring high- and low-cut filters.

This lets users create any kind of chorus effect, from a mild, natural chorus to the clear and penetrating stereo chorus effect popular in contemporary music.

Features

• CE-5 Ultra-high quality compact chorus pedal for guitarists and keyboardists


• High- and Low-cut filters for shaping tonality of the chorus


• Offers Effect Level, Rate, Depth and Filter knobs for complete control


• Mono input and Stereo outputs for connection to dual amps or for studio use


• Produces a range of chorusing effects, from subtle to extreme


• BOSS 5-year warranty

Boss CEB-3 Bass Chorus Pedal

The Boss CEB-3 Bass Chorus Guitar Pedal is a split-frequency chorus pedal capable of applying warm, rich chorus to higher frequencies without muddying the lows.

The Boss CEB-3 Bass Chorus Guitar Pedal gives you a space synthesis effect, that guarantees a natural and spacious chorus effect.

The Boss CEB-3 Bass Chorus Guitar Pedal Main Features Include:

• Nominal Input Level: -20 dBu


• Input Impedance: 1 M ohms


• Nominal Output Level: -20 dBu


• Output Impedance: 1 k ohms


• Recommended Load Impedance: 10 k ohms or greater


• Residual Noise Level: -86 dBu (IHF-A, Typ.)


• Connectors: INPUT Jack, OUTPUT Jack A (mono)/ B, AC Adaptor Jack (DC 9 V)


• Powered by: DC 9 V Battery 9, AC Adaptor (not included)


• Dimensions (WxDxH): 73mm x 129mm x 59mm


• Weight: 0.5kg

Boss CH-1 Super Chorus Pedal

The Boss CH1 Super Chorus features sharp sounds with clear highs, and a stereo effect that varies depending on the spacing between the left and right speakers. The EQ function allows you to adjust the tonality from soft, mellow sounds to sharp, cutting sounds ideal for rhythm guitar.

The history of Boss reads like the history of guitar effects. From their legendary CE-1 chorus pedal (the big gray box that started it all) to the world's favorite line of compact pedals, they've been responsible for more guitar innovations than just about anyone else.

Specifications

• Controls: E. Level, EQ, Rate, Depth


• Connectors: Input, Output, AC Adaptor


• Current Draw: 15 mA (DC 9V)


• Weight: 400g (15 oz.)


• Recommended AC Adaptor: PSA Series

Boss CS-3 Compression Sustainer Pedal

The history of Boss reads like the history of guitar effects. From their legendary CE-1 chorus pedal (the big gray box that started it all) to the world's favorite line of compact pedals, they've been responsible for more guitar innovations than just about anyone else.

The Boss CS3 compresses high-input signals while boosting low-input signals, giving you smooth sustain without degrading the quality of the original sound. A range of effects from gentle compression to squeezed sounds is at your command. Designed for outstanding low-noise performance, the CS3 also provides EQ for precise sonic control.

Specifications

• Controls: Level, Tone, Attack, Sustain


• Connectors: Input, Output, AC Adaptor


• Current Draw: 10 mA (DC 9V)


• Weight: 400g (15 oz.)


• Recommended AC Adaptor: PSA Series

Boss DD-3 Digital Delay Pedal

The Boss DD3 Digital Delay Pedal compact pedal provides a digital delay effect with outstanding quality equivalent to that of a dedicated rack-mount delay unit. In addition to 3 delay time modes, a Delay Time control is furnished, giving you speedy, precise adjustment of delay time continuously within a range of 12.5ms to 800ms. The HOLD function repeats the delay indefinitely.

The history of Boss reads like the history of guitar effects. From their legendary CE-1 chorus pedal (the big gray box that started it all) to the world's favorite line of compact pedals, they've been responsible for more guitar innovations than just about anyone else.

Specifications

Boss DD-7 Digital Delay Pedal

The Boss DD-7 takes the best features from its predecessors and expands the creative potential with Modulation Delay mode, classic modelled Analogue Delay mode, external pedal control options, longer delay time, and more.

On the Boss DD-7 up to 6.4 seconds of delay time is available, a marked increase from its predecessor. In addition, Hold mode allows up to 40 seconds of input to be recorded for creating "sound-on-sound" performances.

The Boss DD-7 is equipped with two innovative new delay modes. Modulation Delay provides chorus-flavoured sounds. Analogue Delay offers a modelled simulation of the classic BOSS DM-2, beloved for its characteristic warmth.

For hands-free control of the DD-7, an external footswitch and Expression pedal (sold separately) can be used. Tap tempo can be controlled from an external footswitch, while delay time, feedback, and effect level can be changed on the fly via Expression pedal.

Create amazing effects with the Boss DD-7's stereo output, such as spatial audio sweeps via true stereo panning. You can also use the stereo outputs to create separate dry and wet signal paths - handy for recording and live-performance control.

Boss DD-7 main features include:

• Expanded delay time, up to 6.4 seconds


• Modulation Delay mode offers natural, chorus-type sounds


• Analogue Delay mode models the classic warm BOSS DM-2 analogue delay sound


• Tap tempo controllable via external footswitch


• Delay time, feedback, and effect level can be controlled via external Expression pedal (sold separately)


• Up to 40 seconds of recording for sound on sound (Hold mode)

Boss DD-20 Giga Delay Effects Pedal

The Boss DD20 Giga Delay. One of the best instrument delays available, powerful features with 23 seconds of delay and memories.

The Boss DD20 Digital Delay offers more user memory and the longest delay of any effect pedal, up to 23 seconds infact. Delay time can be quickly set using the push-button knob or via tap tempo. With a choice of 11 modes including Smooth and Twist delays and sound-on-sound recording, this twin pedal raises the bar for delay effects. With up to 23 seconds of delay, the DD-20 easily outshines the competition and can even double as a sound-on-sound pedal. Delay time can be adjusted via tap tempo or using a knob, which also features a push function to set the delay range more quickly. Eleven delay modes are provided covering everything from analog and tape delay to reverse delay and more. A new Memory function makes it possible to change delay modes. The Twist mode, mentioned earlier, creates wild delay effects similar to over the top manipulation of an analog tape echo, whilst Smooth creates ultra-smooth delay effects. This is a pedal no guitarist should be without.

The main features of the Boss DD20 include:

• One of the best instrument delays available, powerful features with 23 seconds of delay and memories


• 11 delay modes including classic tape delay and sound-on-sound recording


• Smooth and Twist modes for subtle or radical delay effects


• Memory function for changing delay modes seamlessly


• Push-button knob for setting delay time in fine or coarse adjustments


• Powered by 6 x AA batteries (included) or AC Adaptor - PSA240 (optional)

Boss DN-2 Dyna Drive Overdrive Pedal

The Boss DN-2 is an exciting new type of overdrive pedal that reacts to the intensity of your performance.

The unique Boss DN-2 pedal comes equipped with the acclaimed Dyna Amp technology recently introduced in Roland's popular CUBE-60 amp, letting you create unique tone transitions based on picking dynamics. It's possible to get a transparent clean output sound by playing softly, or a powerful heavy overdrive sound by picking aggressively.

Boss DN-2 main features include

• Provides dynamic transition between clean to heavy overdrive based on picking strength and/or guitar volume


• Acclaimed Dyna Amp technology derived from Roland's CUBE-60


• A unique way for guitarists to add expression to their performance


• Road-tough BOSS metal construction

Boss DS-1 Distortion Pedal

The classic BOSS DS1 Distortion pedal provides a harder distortion effect for guitar and keyboard sounds. Instead of toneless, fuzzy distortion, the DS-1 faithfully reproduces all the subtle nuances of playing dynamics-at any volume.

Features

• Classic BOSS Distortion tones for guitar and keyboard


• Reproduces dynamics of playing, from soft to hard


• DS-1 Controls - Distortion, Level and Tone control to tailor overall sound as desired


• BOSS 5-year warranty

Boss DS-2 Turbo Distortion Pedal

The BOSS DS2 Turbo Distortion features twin modes for an expanded choice of distortion. This takes users from blues-rock rhythms to searing leads at the press of a pedal or twist of a knob.

Features

• Classic BOSS distortion tones with added Turbo modes


• Turbo Mode I produces warm and mellow distortion with flat frequency response


• Turbo Mode II provides biting distortion with a mid-range boost, perfect for leads


• Built-in remote jack allows users to connect an external footswitch such as the FS-5L for instant, hands-free switching between modes


• BOSS 5-year warranty

Boss FBM-1 Fender '59 Bassman Amp Simulator Guitar Effects Pedal

Boss FBM-1 brings the natural, fat, rich, bright tone of the Fender Bassman to a BOSS pedal.

In conjunction with Fender, the new BOSS FBM-1 recreates the legendary tone of the 1959 Fender Bassman. Features include the same controls on the original Bassman: Presence, Treble, Mid, and Bass EQ controls. The FBM-1 also functions perfectly as a "pre-gain pedal" placed before an already overdriven amp to add the tone character of the Bassman.

Boss FBM-1main features include:

• Recreates the legendary tone of the 1959 Fender Bassman amp


• Additional BRIGHT IN provides a brighter sound, similar to the original Bassman


• Presence, Treble, Mid and Bass EQ controls


• Road-tough BOSS metal construction


• Perfect pre-gain pedal for adding or retaining Fender tone color

Roland FC-300 MIDI Foot Control Station

The Roland FC-300 sets a new standard of power, versatility and innovation for MIDI foot control.

The Roland FC-300 is outfitted with nine industrial-grade footswitches and two programmable expression pedals for fast, easy control and expanded performance capabilities. The backlit LCD offers a high contrast view of patch names (when used with VG-99) and other important data, even in the darkest stage environments.

With features such as bi-directional MIDI data flow to the Roland VG-99 via newly adopted RRC2, patch memory recall, twin expression and control pedals and more, this advanced control station is a perfect companion for Roland's new VG-99 V-Guitar System or any other performance-based MIDI instrument or device.

Up to 100 sets of MIDI messages/parameters can be stored simultaneously in the Roland FC-300 as patches. Complex MIDI transmission is made simple thanks to the FC-300's ability to package chunks of data together in a single patch, and then transmit each data-burst via footswitch.

Using commercially available LAN (Ethernet, CAT5) cable and the newly-adapted RRC2 protocol, the Roland FC-300 provides both bidirectional MIDI transmission and electrical power supply with one simple connection between VG-99 and Roland FC-300 .

Two multipurpose switch-jacks are built into the Roland FC-300 . These programmable outputs are an ideal feature for guitarists, as they allow amp channels to be switched from clean to lead, for example, in sync with patch changes on the Roland FC-300 .

Roland FC-300 main features include:

• Advanced MIDI foot controller with two assignable expression pedals, two control pedals, nine footswitches and expandability


• New Patch Mode stores up to 100 MIDI setups


• In addition to standard MIDI connection, newly developed RRC2 protocol adapted for bidirectional data flow between FC-300 and Roland RRC2-equipped products


• 3-way power supply and rock-solid metal construction for stage use


• Two Amp Control switches for controlling amp channels or effects

Boss FDR-1 Fender '65 Deluxe Reverb Amp Simulator Guitar Effects Pedal

The Boss FDR-1 is based on the Fender 1965-era Deluxe Reverb — a coveted tube amp known for its natural touch-responsive and distinctive snappy overdriven sound.

In conjunction with Fender, BOSS designed the Boss FDR-1 stompbox to recreate the legendary tone of the 1965 Fender Deluxe Reverb amp. Features include the same controls on the original Deluxe Reverb: Level, Gain, Treble, Bass, Vibrato and Reverb. The Boss FDR-1 also functions perfectly as a "pre-gain pedal" placed before an already overdriven amp to add the tone character of the Deluxe Reverb.

Boss FDR-1 main features include:

• Recreates the legendary tone of the 1965 Fender Deluxe Reverb guitar amp


• Level, Gain, Treble, Bass, Vibrato and Reverb controls


• Road-tough BOSS metal construction


• Perfect pre-gain pedal for adding or retaining Fender tone co

Boss FRV-1 Fender® Reverb Guitar Effects Pedal

The BOSS FRV-1 Fender® Reverb Guitar Effects Pedal is a stunning recreation of the legendary '63 Fender® Reverb via COSM technology.

The BOSS FRV 1 Fender® Reverb Pedal puts that timeless tube-driven reverb sound under your foot in a tough, reliable compact pedal. The original '63 Fender® Spring Reverb is the sound that launched the surf-music phenomenon, and is a staple of rockabilly, country, and blues. Later, it became commonplace in grunge and other modern genres. Now the same legendary sound can be had in an affordable, rugged compact pedal.

The BOSS FRV-1 Fender® Reverb Guitar Effects Pedal Main Features Include:

• A BOSS and Fender® USA collaboration


• Recreates the legendary sound of the 1963 Fender® Reverb via COSM technology


• Easy operation with three classic controls for Dwell, Tone, and Mixer for creating sounds from buttery warmth to sparkling twang


• Cool, retro appearance


• Road-tough BOSS metal construction

Boss FZ-5 Fuzz Guitar Pedal

The Boss FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro.

Looking back at the glorious rock sounds of the '60s and '70s, the Boss FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals, such as the Maestro FZ-1A, Fuzz Face and Octavia pedals, and kick 'em into overdrive with the FZ-5's Boost knob. BOSS' proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.

Boss FZ-5 main features include:

• Vintage sounds inspired by famous fuzz pedals of the '60s and '70s


• Uses advanced COSM technology to recreate classic fuzz


• BOOST control for more aggressive tone


• Road-tough BOSS metal construction

Boss GE-7 Equalizer Pedal

The BOSS GE7 Equalizer pedal offers seven bands of EQ ranging from 100Hz to 6.4kHz.

Best for guitar sounds, with boost/cut of +/- 15dB per band. This lets you completely control your sound and eliminate unwanted feedback, particularly when connected after a distortion effect.

Features

• Compact EQ pedal with 7 bands of adjustable EQ sliders


• Allows for boost/cut of up to +/- 15dB per band


• Perfect as a "boost" pedal for solos, creating an alternate sound, or for eliminating feedback


• BOSS 5-year warranty

Boss GEB-7 Bass Equalizer Bass Pedal

The Boss GEB-7 Seven-Band Bass EQ Guitar Pedal has a frequency range from 50Hz to 10kHz. The Boss GEB-7 is ideal for any bass guitar, including 5-string basses.

The Boss GEB-7 Bass Equalizer features seven bands of EQ for greater control over the crucial midrange.

The Boss GEB-7 Seven-Band Bass EQ Guitar Pedal Main Features Include:

• Nominal Input Level: -20 dBu


• Input Impedance: 1 M ohms


• Nominal Output Level: -20 dBu


• Output Impedance: 1 k ohms


• Residual Noise Level: -100 dBu (IHF-A, Typ.)


• Variable Range: Equalizer Control: +/- 15 dB, Level Control: +/- 15 dB


• Connectors: INPUT Jack, OUTPUT Jack, AC Adaptor Jack (DC 9 V)


• Powered by: DC 9 V Battery 9, AC Adaptor (not included)


• Dimensions (WxDxH): 73mm x 129mm x 59mm


• Weight: 0.4kg

Roland GI-20 GK-Midi Interface

If you're looking to enter the world of synthesis, sample-triggering or MIDI sequencing using your guitar or bass, then the Roland GI-20 is your box.

The Roland GI-20 GK-MIDI Interface detects the signal from any electric guitar or bass equipped with a GK-2A or GK-2B pickup, respectively, and lets you trigger synthesizers and samplers, or even record your playing as MIDI data. And with its built-in USB MIDI port, the GI-20 is perfect for computer-based recording setups.

Using a guitar or bass equipped with an optional GK-2A or GK-2B Divided Pickup, the GI-20 can be used to trigger virtually any MIDI-compatible synthesizer or sampler, as well as out-putting your "natural" guitar sound for amplification.

Thanks to its convenient USB MIDI port, the GI-20 lets you quickly connect your GK-equipped guitar or bass to a variety of computer-based recording systems.

Roland GI-20 main features include:

• Powerful Guitar/Bass-MIDI interface ideal for turning your favourite synthesizer or MIDI module into a guitar synth


• Built-in USB MIDI port for computer connection


• Easy, knob-based controls and dedicated buttons for fast, intuitive operation


• Patch Memory lets you store user settings including "Play Feel," "Transpose/Mute" settings for each string, and Bank Select/Program Change messages for live performance


• Perfect size and configuration for use with Roland XV-2020 Synthesizer Module


• Flexible Transpose functions + 2 / - 3 octave with optional footswitch control

Roland GK-3 Guitar Divided Magnetic Pickup

The Roland GK-3 is for sending individual signals from each guitar string to GK compatible devices.

The Roland GK-3 is carefully designed for guitar performance by having a big and smooth GK knob, and a Select Switch to change from synth, to normal guitar tone, or both of them mixed. Various attachment accessories included; double-sided tapes, holder to secure the controller unit, and special attachment plate for installing the pickup unit to Les Paul-type guitars.

Roland GK-3 main features include:

• Adjustable pickup cable length.


• 1/4" phone jack for normal guitar input.


• New Adjustable Curve Design. Adjust the curvature of the pickup unit to the curvature of the guitar strings.


• Connectors: GK connector, normal Pickup input Jack

Roland GK-3B Divided Pickup For Bass

The Roland GK-3B Divided Pickup For Bass is the perfect pickup for driving these and other MIDI bass rigs.

The Roland GK-3B Divided Pickup For Bass is much smaller and thinner than its GK-2B predecessor, the GK-3B is similar to its guitar counterpart, the GK-3, but catered for bass players.

The Roland GK-3B Divided Pickup For Bass Main Features Include:

• Thinner controller unit (compared to GK-2B)


• Large and smooth GK Knob for controlling volume


• Select Switch for selecting normal bass tone, synth sounds, or a mixture of the two


• Attachment holder and double-sided tape included for easy installation


• Compatible with V-BASS, GR-20 and GI-20

Roland GKC-3 Guitar Synth Cable

The Roland GKC-3 is the industry standard guitar synth cable.

The Roland GKC-3 is 3m 13-pin replacement cable to be used with GK-compatible guitar synths and processors. The Roland 13-pin GK Pickup allows each string to be output as a separate signal, permitting guitar synthesis and effects processing possibilities far beyond conventional guitar pickups. Installing the GK-2A/GK-3 Divided Pickup or GK-2B Divided Pickup for Bass is simple and totally reversible, but the effect you have on your listeners will be permanent.

Roland GKC-3 features include:

• For use with Roland GK guitar systems eg GR-20, GI-20, VGA-3, VGA-7 VG-88, V-Bass, GR-33 and more


• Connector: 13-Pin


• Length: 3 m

Roland GKC-5 Guitar Synth Cable

The Roland GKC5 is a 15 Feet 13 Pin Cable

Use this cable to connect a Roland GK-series pickup to any Roland Guitar Synth, Roland V-Guitar System, or BOSS "GK Effect" pedals (WP-20G Wave Processor & OC-20G Poly Octave).

Roland GKC-10 Guitar Synth Cable

The Roland GKC-10 is the industry standard guitar synth cable.

The Roland GKC-10 is for connecting GK-compatible guitar gear, including the VG-99 V-Guitar System, VB-99 V-Bass Guitar system and the GR-20 Guitar Synthesizer.

Roland GKC-10 features include:

• For use with Roland GK guitar systems eg VG-99 V-Guitar System, VB-99 V-Bass Guitar system and the GR-20 Guitar


• Connector: 13-Pin


• Length: 10.Ft

Roland GK-KITGT3

The Roland GK3 KIT Hex Pickup Kit for Internal Fitting. Transform your guitar into a synth with this interface pickup.

The Roland GK3 KIT sends individual signals from each guitar string to GK-compatible devices. A selector switches between synth, normal guitar tone, and mixed settings. Other features include adjustable pickup cable length and a 1/4 inch phone jack for normal guitar use.

The main features of the Roland GK3 KIT include:

• Sends individual string signals to GK compatible devices


• Selector switch moves between synth, normal guitar tone, and mixed settings


• 1/4 inch phone jack for normal guitar use


• Professional installation required

Roland GR-20GK Guitar Synthesis System Including GK3 Pick-Up

The Roland GR-20GK Guitar Synthesis System including GK3 Pick-Up. An entire orchestra of new instruments at your fingertips.

The Roland GR-20 guitar system makes playing high-quality synthesizer and instrument sounds from your guitar as simple as 1-2-3. Ever wanted to thicken up your guitar sound with a warm synth pad? Or how about a screaming lead sound that puts you in front? First, attach the included GK-3 Divided Pickup to your steel-stringed electric (no drilling necessary). Second, select the type of sound you want using the Bank knob. Third, choose a sound variation using the Number/Value dial and start playing. With the Roland GR-20, it's easy to tap into the power of guitar synthesis. At the heart of the Roland GR-20 is an advanced sound engine based on Roland's professional synthesizers. Sounds can be played with up to 48-voice polyphony for full, rich-sounding Patches. And the sounds are equally impressive. From expressive string ensembles to spiritual tabla loops coupled with sitar - all with adjustable attack and release - there's no limit to what you can do. Sophisticated DSP makes the Roland GR-20's pitch detection ultra-reliable, so you can strum with confidence.

The main features of the Roland GR-20 include:

• Easy to use: select a sound category (Strings, Organ, Synth, etc.) and play!


• Quick editing via Attack, Release, Chorus, and Delay/Reverb knobs


• Digital pitch detection for lightning-fast tracking


• Includes Roland's latest sounds like sax, strings, flute, brass, bass and percussion loops


• Patch Link enables the Roland GR-20 to work with MIDI-capable multi-effects like the GT-6


• GK-3 mounts easily on any steel-stringed electric without damage to guitar


• GK-3 features an adjustable curve design and pickup cable length, plus an attachment plate for Les Paul-type guitars

Boss GT-10B (GT10B)

The Roland GT-10B Bass Effects Processor. Top-of-the-Line Bass Station.

The Roland GT-10B, allows Bass players to enjoy the same core processing muscle and flexibility of the GT-10 in a specially made sibling, optimized for the low-frequency domain. The massive power of BOSS's latest DSP engine and COSM sound-modeling know-how are integrated to provide the most creative and essential features for bass. With Parallel Chain, Phrase Loop, and EZ Tone onboard, the Boss GT10B takes its place as the most advanced-yet-friendly bass station on the market. Powered by BOSS's latest custom-made sound processor, the GT-10B provides dozens of stunning effects algorithms and COSM amp models to explore, combine, and customize, but with careful attention given to the needs of bass players. Indispensable effects for bass, including pro-grade Comp/Limiter, EQ, and OD/DS, compliment the full range of effects offerings onboard, from essential to esoteric.

The main features of the Roland GT-10B include:

• Top-of-the-Line Bass Station


• Optimized for bass, with essential effects such as OD/DS, Comp/Limiter, the GT-10B provides top-quality sounds without sacrificing richness and bottom of the bass tone


• EZ Tone enables intuitive tone creation by using an interactive user interface based on graphic icons


• Parallel Chain offers two separate effects paths that can be blended, switched by playing dynamics, or with the onboard pedals


• Phrase Loop allows instant sound-on-sound loop creation


• USB capability offers audio- and MIDI-streaming in real time


• GT10B comes equipped with XLR outputs as well as 1/4-inch jacks


• AD Conversion: 24-bit + AF method (Adaptive Focus method - a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (S/N) ratio of the A/D and D/A converters)


• DA Conversion: 24-bit


• Sampling Frequency: 44.1 kHz


• Program Memories: 400: 200 (user) + 200 (preset)


• Nominal Input Level - INPUT: -10 dBu, RETURN: -10 dBu


• Input Impedance - INPUT: 1 M ohm, RETURN: 220 k ohms


• Nominal Output Level - OUTPUT: -10 dBu / +4 dBu, SEND: -10 dBu


• Output Impedance - OUTPUT: 2 k ohms, SEND: 3 k ohms


• Dynamic Range: 100 dB or greater (IHF-A)


• Digital Output: Coaxial type (conforms to IEC60958)


• Display: 132 x 64 dots graphic LCD with backlit, 7 segments, 3 characters LED


• Connectors - SUB OUTPUT jacks L, R (XLR type), INPUT jack (1/4 inch phone type), OUTPUT L/MONO, R jacks (1/4 inch phone type), PHONES jack (Stereo 1/4 inch phone type), EXT LOOP jacks SEND, RETURN (1/4 inch phone type), AMP CONTROL jack (1/4 inch phone type), EXP PEDAL 2/CTL3,4 jack (1/4 inch TRS phone type), USB connector, DIGITAL OUT jack, MIDI connectors IN, OUT, DC IN jack


• Power Supply: DC 9 V (AC Adaptor: Roland PSB-1U)


• Current Draw: 800 mA


• Accessories Included: AC Adaptor (Roland PSB-1U), Owner's Manual, Roland Service (Information Sheet)


• Options - Footswitch: BOSS FS-5U, Dual Footswitch: BOSS FS-6, Expression Pedal: BOSS FV-500L/500H, Roland EV-5


• Size - Width: 542 mm 21-3/8 inches, Depth: 272 mm 10-3/4 inches, Height: 77 mm 3-1/16 inches


• Weight: 4.9 kg 10 lbs. 13 oz

Boss GT-10 Guitar Multi Effects Pedal

The Roland GT-10 Guitar Effects Processor. The latest Boss Flagship for Floorboard Multi-FX.

The Roland GT-10, driven by BOSS's latest custom-made DSP and proprietary sound-modeling COSM engine, is a floorboard powerhouse that offers natural and musical response as well as a marked improvement in sound quality from previous generations. It's also loaded with an innovative user interface, including EZ Tone, so guitarists can obtain the exact sound they desire in the most intuitive way imaginable. BOSS's legendary know-how of effects and sound modeling are fully integrated into the latest Boss GT10 flagship floorboard multi-FX unit. As a result, tone quality is significantly higher, and response to playing dynamics is much more natural and musical. And not just for the stage — the Boss GT-10 is also great in the studio thanks to its USB capability and digital output.

The main features of the Roland GT-10 include:

• The latest Boss Flagship for Floorboard Multi-FX


• Massive tone, advanced effects, and a more natural and musical response


• EZ Tone wizard provides the ultimate easy-to-use, intuitive approach to sound creation based on graphic icons


• Parallel effects chain offers two separate effects paths including COSM amp models


• Create sound-on-sound loops with onboard Phrase Loop function


• Large LCD and bright LED enable high visibility even in bright sunlight and difficult concert-stage lighting conditions


• USB capability accommodates streaming audio and MIDI data in real time


• AD Conversion: 24-bit + AF method (Adaptive Focus method - a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (S/N) ratio of the A/D and D/A converters)


• DA Conversion: 24-bit


• Sampling Frequency: 44.1 kHz


• Program Memories: 400: 200 (user) + 200 (preset)


• Nominal Input Level - INPUT: -10 dBu, RETURN: -10 dBu


• Input Impedance - INPUT: 1 M ohm, RETURN: 220 k ohms


• Nominal Output Level - OUTPUT: -10 dBu / +4 dBu, SEND: -10 dBu


• Output Impedance - OUTPUT: 2 k ohms, SEND: 3 k ohms


• Dynamic Range: 100 dB or greater (IHF-A)


• Digital Output: Coaxial type (conforms to IEC60958)


• Display: 132 x 64 dots graphic LCD with backlit, 7 segments, 3 characters LED


• Connectors - INPUT jack (1/4 inch phone type), OUTPUT L/MONO, R jacks (1/4 inch phone type), PHONES jack (Stereo 1/4 inch phone type), EXT LOOP jacks SEND, RETURN (1/4 inch phone type), AMP CONTROL jack (1/4 inch phone type), EXP PEDAL 2/CTL3,4 jack (1/4 inch TRS phone type), USB connector, DIGITAL OUT jack, MIDI connectors IN, OUT, DC IN jack


• Power Supply: DC 9 V (AC Adaptor: Roland PSB-1U)


• Current Draw: 800 mA


• Accessories Included: AC Adaptor (Roland PSB-1U), Owner's Manual, Roland Service (Information Sheet)


• Options - Footswitch: BOSS FS-5U, Dual Footswitch: BOSS FS-6, Expression Pedal: BOSS FV-500L/500H, Roland EV-5


• Size - Width: 542 mm 21-3/8 inches, Depth: 272 mm 10-3/4 inches, Height: 77 mm 3-1/16 inches


• Weight: 4.9 kg 10 lbs. 13 oz

Boss GT PRO Rack Mountable Guitar Multi Effects Processor

The Boss GT PRO Rack Mountable Guitar Multi FX processor. Loaded with twin COSM modeling engines, delivering unprecedented tonal control.

The Boss GT PRO Effects Processor is an incredibly powerful rack processor. It boasts dual COSM processor effect engines and an I/O section that includes XLR outs, three sets of send/returns, and a USB port for data exchange and audio flow. Its dual COSM amp-modeling engine allows you to construct towering tones by combining any two of the 46 amp models then layer, switch, or pan between them as you play. Amp channels and effects can even be controlled according to how hard you play. The Solo switch gives you instant access to a companion lead tone. As the top of GT line, the GT-Pro provides 44 effects categories with 200 preset and 140 user-patch locations. Choose from compressors, overdrives, delays, reverbs, choruses, EQs, wahs, and dozens of other BOSS-quality effects including a sitar and acoustic guitar emulator. The GT-Pro also has ultraflexible effects routing. Internally, the 13 effects blocks can be configured in any order you desire; externally, a trio of stereo effects loops plus an array of assignable outputs enable the most flexible signal-routing configurations.

The main features of the Boss GT PRO include:

• From subtle to sizzling the GT pro delivers towering tone with pro-connectivity


• Dual COSM amp section with Solo Mode for instant tone boost


• 3 stereo effect loops


• Huge array of outputs, including digital


• Built-in USB-audio interface


• Editor/librarian software

Boss EBAND JS-8

The BOSS EBAND JS-8 is a portable audio player designed for guitarists who play and practice the guitar at home.

The BOSS EBAND JS8 combines playback of full songs, backing tracks, or rhythm loops with high quality Boss guitar effects and a built-in stereo speaker system.

This all-in-one solution is ideal for guitarists who want to learn songs, solos and riffs, practice new songs outside of band practice, play along with any of their own collection of music, or create new songs while playing along with audio tracks.

Loading music onto the Boss eBand is easy, with direct playback from any standard USB memory stick or SDHC memory card up to 32GB. The Boss eBand also has the ability to import songs from any audio CD using the included utility software.

Unlike traditional audio players, eBand lets guitarists play along and interact with their music by changing the pitch and tempo independently, or using the advanced centre-cancel function to remove guitar or vocal parts. The Boss eBand comes with 300 backing tracks and rhythm loops and also include pre-programmed guitar effects.

The Boss eBand is loaded with powerful COSM® pre-amp technology, authentic Boss-quality guitar effects derived from the Boss GT-10, and over 100 preset guitar sounds from every musical genre.

To help navigate the possibilities, eBand includes the EZ TONE function, providing an intuitive, easy-to-use approach to sound creation based on graphic icons. In addition, tuner and metronome functions are built in, keeping guitarists playing along on time and in key.

Not only can guitarists play along with the Boss eBand, they can record their music ideas as well using the included USB audio interface. Pressing the record button during a guitar play along session will create and save a new audio file with the entire performance.

The BOSS EBAND JS-8 Main Features Include:

• Imports and plays audio files (WAV and MP3)


• Pitch and tempo control of imported songs


• Guitar/Mic input with dedicated input control; headphone output


• Custom-tuned speakers for powerful playback


• COSM Preamp and 100+ effects derived from BOSS GT-10


• EZ Tone function provides the ultimate easy-to-use, intuitive approach to sound creation based on graphic icons


• 300 audio-loop phrases onboard for backing tracks and rhythms (some include companion guitar effects pre-programmed to match the loops)


• Tuner and metronome built in


• Records and saves your guitar performances


• USB audio interface for direct link to and from PCs


• Play songs from USB memory stick


• Import your favourite songs from audio CD to eBand with included utility software (PC/Mac)


• Memory Capacity: Depends on the SD/SDHC Card (128 MB — 32 GB)


• Data Type: JS-8 Songs (Recording/Playback), MP3 (Bit rate: 64 kbps — 320 kbps, Playback only), WAV (Quantization Bit Rate: 8/16/24-bit, Playback only)


• External Memory: USB Memory


• Effect Patch Memories: Preset: 130, User: 100Effect Types: AMP (Amp Modeling), FX (OD/DS, WAH, COMP, LIMITER, OCTAVE, AC.PROCESSOR, PHASER, FLANGER, TREMOLO, ROTARY, UNI-V, PAN), EQ (Equalizer), NS (Noise Suppressor), DELAY, CHORUS,REVERB


• Dimensions (WxDxH): 264 mm x 166 mm x 201 mm


• Weight: 1.7 kg / 3 lbs. 12 oz.

Boss LMB-3 Bass Limited Enhancer Bass Guitar Effects Pedal

The Boss LMB-3 Bass Limiter Enhancer Pedal Smoothes out your playing by eliminating harsh volume peaks, even when using dynamic slap and pop techniques.

The Boss LMB3 features ratio and threshold knobs thats gives you precise control of limiting parameters.

The Boss LMB-3 Bass Limiter Enhancer Pedal Main Features Include:

• Nominal Input Level: -20 dBu


• Input Impedance: 1 M ohms


• Nominal Output Level: -20 dBu


• Output Impedance: 1 k ohms


• Recommended Load Impedance: 10 k ohms or greater


• Residual Noise Level: -86 dBu (IHF-A, Typ.)


• Connectors: INPUT Jack, OUTPUT Jack, AC Adaptor Jack (DC 9 V)


• Dimensions (WxDxH): 73mm x 129mm x 59mm


• Weight: 0.4kg

Boss LS-2 Line Selector Pedal

The Boss LS2 Line Selector pedal represents the easy way to switch settings among several effects devices or amplifiers, or route input and output signals. Two line loops and six looping modes provide a wide variety of applications.

Used with an AC adaptor, the LS-2 can also supply 9V DC power to several BOSS compact pedals. This makes it an ideal power supply and master switching unit for multiple effects setups.

Boss MD-2 Mega Distortion Pedal

The BOSS MD2 Mega distortion captures the bottom-heavy distortion sounds heard in today's new-school metal and pushes it to the extreme.

The secret is a special dual-stage distortion circuit with an added gain boost-plus new Bottom and Tone controls--for crushing distortion with massive low end. Take your distortion into the future with the MD-2.

Features

• Produces extreme, low-end distortion for modern metal and hard rock


• Gain Boost circuit creates huge distortion and sustain regardless of level


• New Bottom control for bottom-heavy distortion matched to 6- or 7-string guitars


• MD-2 tone control adjusts balance between high and low frequencies


• BOSS 5-year warranty

Boss ME-20B Bass Multi Effects Processor

Boss ME-20B - Performance-Based Effects for Bass.

The Boss ME-20B is a powerful multi-effects unit optimized for live performance, aimed at the performing bassist who wants stage-friendly effects and solid construction at an affordable price. Mix, match, and customize a wide variety of effects, including compressor, overdrive, distortion, T-Wah, phaser, flanger, chorus, delay, reverb, defretter, synth, and more.

Boss ME-20B main features include:

• Performance-based bass processor for the player who wants an easy-to-use interface with BOSS tone and quality


• New super-tough metal chassis with 3 footswitches, 5 realtime control knobs, and expression pedal


• EZ Edit for quick sound creation


• Unique effects such as Synth, Octave, Defretter, and more


• BASS ENHANCE function for instant presence boost


• 30 user memory locations in addition to realtime operation


• Battery or AC powered


• AD/DA Conversion: 24 bit


• Sampling Frequency: 44.1 Khz


• Patches: 30 (user)


• Dimensions: 294 X 179 X 54 mm


• Weight: 1.5kg

Boss ME-25

Boss ME-25: Powerhouse FX with Stompbox Simplicity.

The affordable Boss ME-25 is packed with powerful BOSS features to make you sound like a pro, yet it's as fun and easy to use as a stompbox. The built-in SOUND LIBRARY gives you instant access to dozens of classic and modern effects. Simply choose a category, select a variation, and play.

Customise your sound with simple twists of the Drive, Tone, and Volume knobs. With COSM amp models onboard, plus Super Stack and Phrase Loop, the ME-25 is a dream processor for guitarists who want great sound and ease of use.

The sleek, black and white design of the ME-25 makes each button, knob, and pedal easy to see and access. Three footswitches, an Expression pedal, four knobs, nine backlit buttons, and enlarged LED panel provide an uncluttered control panel that's great for any environment — even on dark stages.

Its price might imply "entry level" but the COSM-driven ME-25 is nothing but first class. Exquisite amp models derived from the deluxe ME-70 cover a wide stylistic landscape, from classic to contemporary. The new ULTRA METAL offers screaming hi-gain distortion for all kinds of metal music.

Included in the tone palette is SUPER STACK, which, with one press of the dedicated button, makes a small practice amp sound like a monster stack.

Dozens of ready-to-use presets are built into the ME-25's onboard SOUND LIBRARY, all quickly selectable by category, but you can easily customise the sounds with the dedicated front-panel knobs. Free downloadable Librarian software also lets you edit and save your sounds easily and conveniently onscreen.

Connect the Boss ME-25 directly to a PC with a USB cable and you have a personal recording studio at your fingertips. The ME-25 can function as a USB audio interface, which creates a convenient, consolidated studio setup with Cakewalk SONAR 8.5 LE software (included). With this setup, you can stream audio back and forth between the ME-25 and PC directly via USB.

Boss ME-25 main features include:

• Powerful COSM amp models onboard, from classic to contemporary


• Friendly user-interface optimized for first-timers


• SOUND LIBRARY provides extensive collection of ready-to-use tones; simply choose a category and select a variation


• Sounds can be instantly edited with the Drive, Tone, and Level knobs and Expression pedal


• SUPER STACK adds immensely heavy low-end and punch


• Phrase Loop function with 38 seconds of recording time


• Functions as a USB audio interface


• Built-in AUX input for jamming along with external music devices (MP3/CD players, etc.)


• Runs on six AA batteries or AC adaptor


• Cakewalk SONAR 8.5 LE software included


• Free downloadable Librarian software

Boss ME-50B Bass Multiple Effects Processor

The Boss ME50B Bass Guitar Multi FX Pedal. Delivers world-class bass effects in a rugged floor unit with easy pedal-style control.

The Boss ME50B is a bass player's dream come true. It produces a professional sound on an easy-to-use pedal enabling control over everything with clearly marked knobs. Effects are divided into 6 sections (Compressor/Limiter, Master EQ, Filter/Tone, Drive/Synth, Delay/Modulation, and Expression Pedal), giving bassists a range of unique and powerful tones including fresh effects like Sound Hold, Octave Up, and Kick Drum all with easy knob-based control.

The main features of the Boss ME50B include:

• Floor-based bass multi-effects processor with easy analog control


• Killer COSM Compressor/Limiter and Drive effects, plus T-Wah, Slow Gear and Defretter


• Innovative Sound Hold function for sustaining a low note while playing on top


• Sound On Sound recording with new Kick Drum effect for keeping time


• Dedicated knobs for each effect section


• Easy Tone effects with Preset EQ templates for quick tone editing


• 3 foot switches and onboard expression pedal for easy realtime control


• Solid metal case built to withstand abuse


• 1/4 inch jack stereo outs


• 1/4 inch jack TRS line/phones out


• 1/8 inch jack TRS (mini jack) aux in


• 1/4 inch jack footswitch in (Compressor ON/OFF or Tempo)


• Powered by 6 x AA batteries (included) or AC Adaptor - PSA Series (optional)

Boss ME-70 Guitar Multi-Effects

The Boss ME-70 Guitar Multi-Effects Pedal has a friendly, knob-laden design, making tone creation easy. But with a powerful COSM Preamp section derived from the Boss GT-10.

The Boss ME70 breathes life into your performances with the built-in Expression Pedal. Simply dial up one of the six pre-programmed pedal-control destinations (Wah, Voice, +1 Octave, -1 Octave, Mod Rate, and Delay Level), put your foot down, and express yourself.

The Boss ME-70's Delay section is equipped with a dedicated Phrase Looper, which offers a lengthy 38 seconds of recording time. Play a riff, capture and loop it, and solo over it, all in real time onstage. Amaze your audience with multi-layered magic live onstage.

The Boss ME-70 Guitar Multi-Effects Pedal Main Features Include:

• Dedicated knobs for each parameter for fast, friendly operation


• COSM Preamp section derived from GT-10 and Legend series


• EZ TONE for quick, easy editing


• Four footswitches and Expression pedal


• PHRASE LOOP function in DELAY section, with 38 seconds of recording time


• AD Conversion: 24-bit + AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (S/N) ratio of the A/D and D/A converters


• DA Conversion: 24-bit


• Sampling Frequency: 44.1 kHz


• Patch: 36 (User) + 36 (Preset)


• Nominal Input Level: GUITAR INPUT: -10 dBu, AUX IN: -18 dBu


• Input Impedance: GUITAR INPUT: 1M ohm, AUX IN: 22k ohms


• Nominal Output Level: -10 dBu


• Output Impedance: 2k ohms


• Display: 7 segments, 2 digits LED


• Dimensions (WxDxH): 384mm x 229mm x 74mm


• Weight: 3.5kg

Boss ML-2 Metal Core Pedal

With its extreme gain, the Boss ML-2 is the most potent and heavy distortion pedal ever created by BOSS.

The Boss ML-2 easily delivers massive distortion and gain with heavy lows for playing Nu Metal, Grind Core, Industrial, Hard Core, or any genre that requires crushing sound. The ML-2's ferocious and biting tone will complement and cut through any blast beats your rhythm section can create.

Boss ML-2 main features include:

• Ultra-heavy distortion with sharp-edged attack for crushing metal riffs


• LOW control for heavy, low frequency sound a la 7-string guitar or dropped tuning


• HIGH control for screaming, metallic tone


• Road-tough BOSS metal construction

Boss MT-2 Metal Zone Pedal

The BOSS MT2 Metal Zone is one of BOSS' most popular pedals. This stomp box supplies some of the most over-the-top, insane distortion tones in the world—with huge mids and lows and an ultra-saturated sound.

Features

• Incredible-sounding distortion pedal with unique dual-gain circuitry


• Provides super-long sustain and heavy mids and lows like a stack of overdriven amps


• Three-band EQ with semi-parametric Mid control offers a wide range of extreme distortion textures


• A must-have pedal for any hard rock or metal guitarist


• BOSS 5-year warranty

Boss NS-2 Noise Suppressor Pedal

With the Boss NS2 you can eliminate unwanted noise and hum without altering your tone. A unique noise detection circuit preserves the natural attack and envelope, leaving your playing and dynamics intact.

The NS-2 can be connected in two different ways. You can connect the NS-2 last in your chain of effects. The output of the previous pedal goes to the NS-2 input jack. Wire the Output jack of the NS-2 to your amp. The NS-2 can also be wired like an effects loop, which allows you to kill your entire signal chain just by stomping on the NS-2. Take the Send output of the NS-2 into your first pedal. Take the output of your last pedal and wire it to the Return jack of the NS-2.

The NS-2 uses an intelligent circuit to differentiate between the sound of the guitar and noise. The NF-1 simply cut all sound when it became weaker than a threshold value. The NS-2 attempts to let the sound of the guitar through while re-moving the noise.

Specifications

• Controls: Threshold, Decay, 2 way mode switch


• Connectors: Input, Output, AC Adaptor


• Current Draw: 20 mA (DC 9V)


• Weight: 400g (15 oz.)


• Recommended AC Adaptor: PSA Series

Boss OC-3 Super Octave Pedal

The BOSS OC3 Super Octave gives guitarists high-quality octave effects with a single stomp. Three modes are provided, including a new Polyphonic Octave mode, a Drive mode with distortion, and the original OC-2 mode. The versatile OC-3 also has separate inputs for both guitar and bass.

Features

• World's first compact pedal with true Polyphonic Octave effects


• New Drive mode adds distortion to octave notes for a fatter, more aggressive tone


• Includes the original OC-2 mode, capable of producing notes one and two octaves down


• Poly Octave effect adjustable to play within a specific note range


• OC-3 has a bass input for adapting octave sound to bass guitars


• BOSS 5-year limited warranty

Boss OD-20 Drive Zone Twin Guitar Effect Pedal

The Boss OD-20 Drive Zone Twin Guitar Pedal uses advanced COSM® technology to model the sound of classic overdrive/distortion pedals of the past 30 years, as well as creating new sounds of its own.

The Boss OD-20 Drive Zone features 22 pedal settings, including "Attack Shape" and "Heavy Octave" parameters for dialing in subtle nuances or extreme tones. You can even switch amp channels remotely using the OD-20's Amp Control jack.

The Boss OD-20 Drive Zone Dual Guitar Pedal Main Features Include:

• COSM Overdrive/Distortion Modeling pedal with 22 killer stompbox models including 6 all-new tones


• Models classic and modern overdrive/distortion pedals like BOSS OD-1 and MT-2, plus many other vintage and boutique pedals


• Attack Shape control adjusts overdrive's response dynamics to your playing


• Heavy Octave parameter creates sounds one octave below notes played on the 4th string, 4th fret and lower-great for heavy, single string riffs


• 4 User memories for storing custom settings


• Line output with Amp Simulator; also works as headphone output


• Amp Control jack for switching amp channels from the OD-20


• Nominal Input Level: -20 dBu


• Input Impedance: 1 M ohms


• Nominal Output Level: -20 dBu


• Output Impedance: 1 k ohms


• Recommended Load Impedance: 10 k ohms or greater


• Dynamic Range: 102 dB (IHF-A typ.)


• Indicators: Power Indicator (serves also as battery check indicator), EFFECT ON/OFF Indicator, MANUAL Indicator (1 to 4)


• Connectors: INPUT, AMP CTRL, LINE OUT/PHONES, OUTPUT, AC Adaptor (DC 9V)


• Powered by: DC 9 V Battery 9, AC Adaptor (not included)


• Dimensions (WxDxH): 173mm x 158mm x 57mm


• Weight: 1.1kg

Boss OD-3 OverDrive Pedal

Built in the tradition of the legendary Boss overdrives, the Boss OD3 OverDrive pedal gives guitarists a greatly expanded range of smooth overdrive tones and improved response while staying true to the original.

The OD-3 OverDrive gives guitarists a greatly expanded range of smooth overdriven tones, making it one of BOSS' most versatile overdrives ever

The main features of the Boss OD3 include

• Dual-Stage Overdrive Circuit offers a level of sustain and compression unmatched by any overdrive pedal in history


• Dramatcially increased full bass response and improved dynamics yield a "bigger" sound than any previous BOSS overdrive pedal


• Dynamic, non-muffled tones reminiscent of classic overdriven "stack" amps


• Straightforward Drive, Tone and Level controls


• BOSS 5-Year Warranty

Boss ODB-3 Bass Overdrive Pedal

The Boss ODB3 Bass Overdrive Compact Pedal. Powerful bass distortion for hard rock, thrash, and punk bassists.

The Boss ODB3 Bass OverDrive pedal brings the chest-resonating distortion that hard rock, thrash, and punk bassists have been waiting for. This hot compact pedal has been designed specifically for bass applications.

The main features of the Boss ODB3 include:

• OverDrive pedal specifically designed for bass


• Onboard two-band equalizer


• Balance knob controls dry/overdriven sound


• AC adaptor or 9V battery operation (not included)


• BOSS 5-year warranty

Boss OS-2 Overdrive Distortion Pedal

The Boss OS2 Overdrive Distortion Pedal for Guitar and Bass Guitar. Powerful overdrive or distortion or a combination of both.

The Boss OS2 gives you a choice of overdrive or distortion or lets you combine both - all in a single compact pedal. This integration gives you more options than by using serially connected units, and the OS-2 can provide hard distortion that maintains the subtle nuance of single-coil guitar pickups.

The main features of the Boss OS2 include:

• Controls: Level, Tone, Drive, Colour


• Connectors: Input, Output, AC Adaptor


• Current Draw: 12 mA (DC 9V)


• Weight: 400g (15 oz.)


• AC adaptor or 9V battery operation (not included)


• Recommended AC Adaptor: PSA Series

Boss PH-3 Phase Shifter Pedal

The Boss PH3 Infinite Phaser Compact Pedal for Guitar. Powerful overdrive or distortion or a combination of both.

The BOSS PH3 Phase Shifter pedal offers a wealth of vintage and contemporary phasing effects, including Rise and Fall modes for unique, unidirectional phasing. Syncing the PH-3's phasing effects is as simple as tapping the pedal to the desired tempo, while an optional expression pedal provides realtime control of the PH-3's Rate, Filter and Tempo. In addition to standard up and down cycles, the Boss PH-3 Infinite Phaser can produce entirely upward or downward moving sounds through its Rise and Fall effects. There's also 4-, 8-, 10-, and 12-stage phasers, plus a Step effect.

The main features of the Boss PH3 include:

• Compact pedal with versatile vintage and modern BOSS phasing


• Rise and Fall modes create unidirectional phasing


• Includes classic multi-stage phasers with selectable stages


• Realtime control of Rate, Filter, and Tempo via optional expression pedal


• Tap tempo sync of phasing effects


• AC adaptor or 9V battery operation (not included)


• Recommended AC Adaptor: PSA Series


• BOSS 5-year warranty

Boss PS-5 Super Shifter Pedal

The Boss PS5 Super Shifter Compact pedal. The ultimate pitch shift box and so much more.

The BOSS PS5 Super Shifter is a next-generation intelligent pitch shifting pedal with killer sounds and BOSS first features. The Boss PS-5 provides pitch shifting, harmonies, detuning, and wild tremolo arm/flutter effects--all with simple, knob-based control. Recognized by guitarists everywhere as the world's first name in compact effects pedals, BOSS makes sure you get the tone you want every time you play. Whether it be classic or hard rock, blues, jazz, country, funk or something new, wild and completely on the edge, BOSS helps you find your tone.

The main features of the Boss PS5 include:

• Compact pedal with high-quality pitch shifting, Harmonist and tremolo arm effects


• Intelligent, key-specific pitch shifting of single notes using simple Pitch and Key knobs with scale display


• Key Shift outputs continuous shifted tone for playing in different keys


• Detune effect provides slight shifting for fattening a guitar sound


• Tremolo Arm effect bends single notes up or down to a pre-selected value when pedal is activated; optional expression pedal can be connected for realtime control


• Flutter effect simulates fast or slow slap or slam of tremolo bar when pedal is depressed


• AC adaptor or 9V battery operation (not included)


• Recommended AC Adaptor: PSA Series


• BOSS 5-year warranty

Boss PW-10 V-Wah COSM Modeling Wah Wah Pedal

The Boss PW10 V Wah Wah Compact Pedal. A Wah Pedal for the 21st Century.

The Boss PW10 is likely to be the last wah pedal you'll ever need or want-to buy. This first-of-its-kind programmable modeling wah gives you instant access to six classic and modern wah pedal sounds, as well as Double Resonance, Uni-V and Voice sounds never found in a wah pedal before. Plus the V-Wah features onboard overdrive/booster effects, three digital memories for storing your favourite sounds, noise-free infrared operation and more.

The main features of the Boss PW10 include:

• World's first COSM modeling wah pedal, with 6 classic and modern wah pedal models


• Advanced infrared pedal detection delivers no click sound when it's turned on and never needs to be cleaned or have parts replaced


• 8 onboard Overdrive/distortion effects to perfectly complement the wah sounds


• Voice mode simulates talking vowel sounds


• Double resonance mode creates analog synth-type sounds


• Uni-V effect produces vintage swirling rotary sounds


• 3 digital memories for saving customized wah sounds for instant recall


• Wah Range knob allows users to customize the filtering range instantly


• Powered by LR6 (AA) type) x 6 or PSA240 AC Adaptor (Option)

Roland RAD-99 Rack Mount Adaptor

The Roland RAD-99 Rack Mount Adaptor is a rack mount adaptor for tabletop instruments such as VG-99 V-Guitarsystem.

The Roland RAD99 allows gear to be positioned flush or tilted and locked at an angle.

The Roland RAD-99 Rack Mount Adaptor Main Features Include:

• Rack mount adaptor for products such as VG-99 V-Guitar System.


• Can be positioned flush or tilted and locked at an angle that best suits your working environment

Boss RC-2 Loop Station Pedal

The Boss RC2 Looping Compact Pedal for Guitar. Store up to 16 mono minutes of audio on the most compact and affordable Loop Station.

The Boss RC2 is an authentic Loop Station in a Stomp Box. Already in heavy demand around the world are the twinsize BOSS RC-20XL and the deluxe, extra-wide RC-50. Now comes an ultra-compact member of the RC family, the RC-2. Housed in a compact-pedal case, the RC-2 puts a surprising amount of features in a stompbox. The RC-2 can record and store up to 16 mono minutes of audio, either from your own instrument or other external input devices, such as MP3 players/recorders. Each of your layered loop creations can be stored to one of 11 internal patch preset locations. It records, layers, and loops, but the RC-2 also provides a wealth of other handy and powerful features, such as a jam-along Rhythm Guide, Auto Start, Tap Tempo, Loop Quantize, and Undo/Redo. Recognized by guitarists everywhere as the world's first name in compact effects pedals, BOSS makes sure you get the tone you want every time you play. Whether it be classic or hard rock, blues, jazz, country, funk or something new, wild and completely on the edge, BOSS helps you find your tone.

The main features of the Boss RC2 include:

• Up to 16 minutes of record time


• Loop Quantize for perfect loop timing


• Realistic Guide-Tone drum patterns built in


• Easy, logical overdubbing and navigation


• Undo/Redo function


• 11 phrases can be stored and recalled


• AUX input to capture phrases from external audio device


• External pedal input (stop/tempo)


• AC adaptor or 9V battery operation (not included)


• Recommended AC Adaptor: PSA Series

Boss RC-20XL Loop Station Pedal

The Boss RC20XL Loop Station Phrase Recorder. Create multi-layered performances in real time.

The Boss RC20XL enables you to build loops and riffs that can be stacked repeatedly until the entire massive 16 minutes of recording space is full. Using the Boss RC-20XL Loop Station you can play back up to 11 loops at a time and use the undo function, auto quantize, and loop tempo without changing pitch. The RC-20XL has 11 memory tracks, in which you have the choice of storing either one-shot phrases or loop phrases. During your performance, you can switch between the tracks with an optional FS-6 Dual foot switch, or two FS-5U foot switches (momentary-type). The Undo function can be a useful and musical function for erasing your previous phrase and instantly layering a new one. After you have dazzled your crowd, now its time to bring it to an end. The RC-20XL offers three stop options for this purpose. When you hit the pedal, you can either immediately stop the playback, let the phrase play until the end, or fade it out. The Boss RC20XL has a Mic and instrument input on 1/4 inch jack, a stereo Aux input on Phono type connectors, Phrase Shift control on 1/4 inch jack TRS, Reverse control on 1/4 inch jack, Output on 1/4 inch jack and an AC Adaptor jack for the optional AC Adaptor (PSA-series). The unit is powered by 6 x AA batteries, supplied with this product.

The main features of the Boss RC20XL include:

• Super long recording time, up to 16 minutes


• Save up to 11 loops at a time


• Undo function makes it easy to create perfect loops


• Built-in auto quantize for simple and accurate loop timing


• Change loop tempo without changing pitch


• Footswitchable loop select (with optional FS-5U/FS-6)


• Powered by 6 x AA batteries (included) or AC Adaptor - PSA Series (optional)

Boss RC-50 Loop Station Effects Pedal

Introducing the Roland RC50 Loop Station. The most feature-laden Loop Station BOSS has ever built.

The Roland RC50 is one of the best live looping tools ever built. Housed in a spacious seven footswitch floor unit, the RC-50 lets you manipulate three stereo phrase tracks simultaneously, with each track supporting multiple overdubs. In other words, you can record phrase upon phrase, one by one, on each track, resulting in a monstrous stack. The RC-50 also provides a total of 379 play-along Rhythm Guide Patterns in a wide variety of time signatures, can be connected and synced to a MIDI network and has an impressive I/O set. The RC-50 has plenty of other noteworthy features on offer, for example: Phrases can be played forward or backward. Phrases can be retriggered in free time or on a time-aligned grid. Errors can be corrected on the fly with the Undo/Redo switch.

The main features of the Roland RC50 include:

• Highly respected looping tool for live performance


• 7 foot switches for intuitive control; realtime control of playback speed


• Play up to 3 stereo phrase tracks simultaneously, all synced to an internal or MIDI clock


• Ultra-long recording time (up to 49 min., mono), 99 patches (3 master loops per patch)


• Undo/Redo function for recording and overdubbing


• Center-cancellation feature, flat amplifier simulation feature


• Stereo input, dual stereo output, XLR phantom-powered mic input, stereo mini-jack Aux input (for recording from an MP3 players, etc.)


• USB port for data/audio backup, import/export of loops as WAV files

Boss RE-20 Twin Pedal Space Echo Pedal

Boss RE-20 Space Echo pedal - The Rebirth of a Roland Classic.

One of the most beloved echo effects ever made, the Roland RE-201 Space Echo, has been reborn as the BOSS RE-20 Twin Pedal! Roland and BOSS have recreated every sonic detail and nuance of the original. Experience the legendary tape-echo sound of the RE-201, and get "lost in space" with this retro-modern marvel.

Boss RE-20 main features include:

• Amazing simulation of the famous Roland RE-201, with the spacious, analogue tone of the original Space Echo


• Faithful modelling of the RE-201's tape flutter and magnetic head sound saturation


• Tap input pedal allows delay time to be set by foot


• Longer delay time than the original RE-201


• Control parameters such as REPEAT RATE, INTENSITY, and more via Expression pedal


• MODE SELECTOR knob with 12 placements just likes the original Space Echo

Boss RT-20 Rotary Ensemble Effects Pedal

The Boss RT-20 Rotary Sound Processor. Create amazing classic rotary speaker sounds, with overdrive.

The Boss RT-20 sets a new standard in rotary speaker simulation. From the Beatles to Jeff Beck, Santana to Stevie Ray, many guitar greats have embraced the rotary-speaker sound on stage and in the studio. Today BOSS proudly announces the newest member of its Twin Pedal series — the RT-20 Rotary Sound Processor. Employing COSM-modeling technology, the RT20 authentically reproduces classic rotary-speaker sounds. It offers adjustable Rise Time, Horn and Bass speed, Overdrive, and more. And not just for classic twirl, the RT-20 can be used to create unique overdrive and pulsating effects as well. This pedal sounds amazing, and offers a stunning graphical view of the virtual rotors on its built-in display.

The main features of the Boss RT-20 include:

• Create amazing classic rotary speaker sounds, with overdrive


• Authentic rotary speaker sounds by COSM technology


• Slow/Fast transition time is adjustable from gradual to rapid change; optional Expression pedal can control speed in real time


• Onboard Overdrive effects


• Adjustable mix balance between Treble Rotor and Bass Rotor


• 4 types of sounds, from standard rotary speaker effects to rock-oriented tones, UNI-V, and more


• Guitar/Keyboard switch


• Dazzling virtual-rotor display


• Nominal Input Level: -20 dBu


• Input Impedance: 1 M ohms


• Output Impedance: 1 k ohms


• Recommended Load Impedance: 10 k ohms


• Display: VIRTUAL ROTOR


• Controls: EFFECT ON/OFF pedal, SLOW/FAST pedal, MODE knob, RISE TIME knob, EFFECT LEVEL knob, DIRECT LEVEL knob, BALANCE knob, OVERDRIVE knob, SLOW SPEED knob, FAST SPEED knob, DRIVE TYPE switch


• Indicators: POWER(serves also as battery check indicator), EFFECT ON/OFF, SLOW/FAST


• Connectors: INPUT A (MONO) jack (1/4 inch phone type), INPUT B jack (1/4 inch phone type), SPEED (EXP PEDAL) jack (1/4 inch phone type), PHONES jack (stereo 1/4 inch phone type), OUTPUT A (MONO) jack (1/4 inch phone, type), OUTPUT B jack (1/4 inch phone type), AC Adaptor jack


• Power: DC 9 V=Dry battery (R6/LR6 (AA) type) x 6, AC Adaptor (PSA-series)


• Included Accessories: Owner's Manual, Dry battery x 6 (R6/LR6 (AA) type)


• Optional Accessories: AC Adaptor (PSA-series)


• Size - Width: 173 mm 6-13/16 inches, Depth: 158 mm 6-1/4 inches, Height: 57 mm 2-1/4 inches


• Weight: 1.1 kg 2 lbs. 7 oz.

Boss RV-5 Digital Reverb Pedal

The BOSS RV5 Digital Reverb Effect Stomp Box Reverb Compact Pedal for Guitar. Six high quality, studio grade reverbs in one pedal.

The BOSS RV5 Digital Reverb brings six of the best BOSS reverbs into one stereo effects pedal. The BOSS RV-5 reverbs include a convincing spring reverb emulation and a high-quality gate reverb, plus an a Modulate mode for spacious detuned reverb sounds.

The main features of the Boss RV5 Digital Reverb include:

• Compact pedal with stereo input/output for use with other stereo effects


• 6 high-quality reverb modes on par with rackmount processors


• Spring reverb emulation offers realistic spring reverb sounds


• Gate reverb derived from high-end Roland studio gear


• Modulate mode detunes the reverb sound for added spaciousness


• AC adaptor or 9V battery operation (not included)


• Recommended AC Adaptor: PSA Series


• BOSS 5-year warranty

Boss SD-1 Super Overdrive Pedal

The BOSS SD1 Super Overdrive Compact Pedal. Classic smooth overdrive pedal, perfect for blues and rock.

The BOSS SD1 Super OverDrive pedal creates the warm, natural distortion of an overdriven tube amplifier while maintaining the subtle nuances of a player's picking technique. This is one of the more subtle and smooth BOSS overdrive pedals, perfect for blues and rock. The BOSS SD-1 has unique asymmetric overdrive circuitry that delivers a genuine overdrive effect for a classic guitar sound. A Tone control is also provided for precise tonal adjustment.

The main features of the Boss SD1 include:

• Compact overdrive pedal with warm, smooth overdriven sounds


• Unique asymmetric overdrive circuitry for a classic, natural tube amp growl


• SD-1 tone control provides precise adjustment of drive sound


• AC adaptor or 9V battery operation (not included)


• Recommended AC Adaptor: PSA Series


• BOSS 5-year warranty

Boss SL-20 Slicer Effects Pedal

Inject a shot of high-octane fuel into your music with the Boss SL-20 Slicer.

With the Boss SL-20 you can instantly transform a guitar, bass, keyboard, or vocal into a pulsating groove instrument. Choose from 50 onboard Slice patterns or experiment with the SL-20's innovative Harmonic Slicer feature, which generates percussive melodies, Loop Record, and unique 3D Panning.

The Boss SL-20 transforms your music into percussive "chopped" grooves. Fifty rhythmic patterns are onboard, with adjustable note attack and duration, plus amazing Harmonic Slice effects. Create high-energy patterns onstage in real-time, or use the Boss SL-20 as a song writing and recording tool. Play the sliced sounds in real-time while capturing them with Loop Record.

An internal tap-tempo feature is included, as well as the ability to sync to external MIDI clock. Sound characteristics of the Boss SL-20 such as attack, duration, effect level, and direct level can be controlled by the onboard knobs or from an external Expression pedal.

The Boss SL-20 is an addictive effect that inspires creativity. It's great for guitarists, but it's equally useful for other instrumentalists as well. Plug in a bass, keyboard, iPod®, or any other instrument or music-playback device. DJs and dance-music artists will also love the Boss SL-20 as a rhythmic-performance tool.

Boss SL-20 main features include:

• Instant groove and percussive-melody generator


• 50 Slice patterns onboard, with adjustable attack and duration, including Harmonic Slice


• Tap Tempo via onboard pedal switch; internal and MIDI sync


• Sound characteristics such as attack, duration, effect level, and direct level are controllable via external Expression pedal (sold separately)


• Variety of output modes, including the unique 3D Panning for spacious sliced FX

Boss SYB-5 Bass Synthesizer Pedal

The Boss SYB-5 Bass Synthesizer Guitar Pedal is the world's first bass synthesizer to be packed into a compact pedal.

The Boss SYB-5 Bass Synthesizer Guitar Pedal features the latest in DSP technology, reproducing fat, sharp sound characteristics of classic analog synthesizers.

The SYB-5 Bass Synthesizer Guitar Pedal Main Features Include:

• 11 DSP variations of Saw, Square, and Pulse synth waves


• Control filter cutoff and LFO rate via EV-5 Expression Pedal (sold separately)


• Enhanced Wave Shape Mode provides sharper sounds


• Hold notes with the onboard pedal and jam over the top


• Nominal Input Level: -20 dBu


• Input Impedance: 1 M ohms


• Nominal Output Level: -20 dBu


• Output Impedance: 1 k ohms


• Recommended Load Impedance: 10 k ohms or greater


• Residual Noise Level: -96 dBu (IHF-A, Typ.)


• Connectors: Input jack, Output A (MONO) jack, Output B jack, EXP jack, AC adaptor jack (DC 9 V)


• Powered by: DC 9 V Battery 9, AC Adaptor (not included)


• Dimensions (WxDxH): 73mm x 129mm x 59mm


• Weight: 0.4kg

Boss TR-2 Tremolo Pedal

The BOSS TR2 Tremolo Compact Pedal. Classic tremolo effects with plenty of control.

The BOSS TR2 Tremolo is designed to provide guitarists with classic tremolo effects in an easy-to-use compact pedal. The Boss TR-2 has dedicated Wave, Rate, and Depth knobs that provide a multitude of effect possibilities. Recognised by guitarists everywhere as the world's first name in compact effects pedals, BOSS makes sure you get the tone you want every time you play. Whether it be classic or hard rock, blues, jazz, country, funk or something new, wild and completely on the edge, BOSS helps you find your tone.

The main features of the Boss TR2 include:

• Provides guitarists with high-quality vintage tremolo effects in an easy-to-use compact pedal


• Dedicated Wave, Rate and Depth knobs allow for precise effect tailoring


• Rate control allows for higher speed adjustment than classic PN-2


• Wave control alters LFO waveform from triangle to square


• Depth control determines the strength of the effect


• AC adaptor or 9V battery operation (not included)


• Recommended AC Adaptor: PSA Series


• BOSS 5-year warranty

Boss TU-3 Chromatic Tuner Guitar Tuner Pedal

The Boss TU-3 Chromatic Tuner is housed in a tank-tough BOSS stompbox body, featuring a smooth 21-segment LED meter with a High-Brightness mode that cuts through the harshest outdoor glare.

The Boss TU3 allows you to choose between Chromatic or Guitar/Bass tuning modes, and enjoy visual pinpoint tuning verification with the Accu-Pitch Sign function. The TU-3 incorporates a convenient Note Name Indicator that can display notes of 7-string guitars and 6-string basses, while the Flat-Tuning mode can support up to six half-steps.

The Boss TU-3 Chromatic Tuner Main Features Include:

• 21-segment LED meter with brightness control


• High-Brightness mode enhances meter visibility outdoors


• Accu-Pitch Sign function provides visual verification when tuning is complete


• Chromatic and Guitar/Bass mode (tune by string number, with support for 7-string guitars and 6-string basses)


• Flat tuning is supported with Guitar Flat mode, which allows for tunings up to six semitones below standard pitch


• Tuner automatically mutes when the tuner is on


• Supplies power for up to 7 BOSS compact effect pedals


• Dimensions (WxDxH): 73 mm (2-7/8 inches) x 129 mm (5-1/8 inches) x 59 mm (2-3/8 inches)


• Weight: 390 g (0 lbs. 14 oz.)

Boss VE-20 Vocal Performer

The BOSS VE-20 VOCAL PERFORMER has been designed from the ground up for singers, featuring some of the finest vocal-effects technology on the market.

The BOSS VE 20 VOCAL PERFORMER allows you to instantly add lush vocal layers and harmonies to your singing. Add realtime pitch-correction, and show your creative side with special effects such as Distortion, Radio and Strobe.

The BOSS VE20 offers incredible easy user interface to totally control your vocal sound. Simply dial up your favourite setting and sing — no programming required. VE-20 is a practical vocal effects processor even for beginners.

The high resolution signal path is based on the design of the now classic ASP8024. We've drawn on David Dearden's wealth of experience and the evolution of his designs going back to the 1970s, combining the benefits of traditional discrete circuitry with the latest advances in audio design technology.

Select the harmony interval of your choice, or create multi-part stacks, such as upper third and lower fifth, and save them for instant recall. You can also thicken your vocals with Double Track. Sing, record, loop, and overdub with the onboard Phrase Looper, inherited from BOSS's popular RE-20XL Loop Station. You get 38 seconds of mono record time to loop and layer phrases, and you can do it all in real time onstage.

With the same solid-metal construction as other BOSS stompboxes, the VE-20 is built to last. Its footprint is identical to BOSS Twin-Series pedals, ensuring that it will fit perfectly into existing multi-pedal BOSS pedalboards and travel cases.

The BOSS VE-20 VOCAL PERFORMER Main Features Include:

• Specialised effects for vocalists, including Harmony, Double-Track, Dynamics, Reverb, Delay, and more


• Create the total of 3-part harmonies and layers


• Realtime pitch-correction tools


• Special FX, including Distortion, Radio and Strobe


• Phrase Looper with 38 seconds (mono) of recording time


• Phantom power for condenser microphones


• Runs on six AA-batteries or AC adaptor (PSA)


• Easy operation, road-tough BOSS construction


• Power Supply: DC 9 V: Dry battery LR6/R6 (AA) type x 6, AC Adaptor (PSA series)


• Input Impedance: 4 k ohms


• Output Impedance: 600 ohms / PHONES/LINE: 66 ohms


• Memory: Sound: 30 (Preset) + 50 (User)


• Phrase Loop: Mono 38 sec.


• Dimensions (WxDxH): 173 mm x 158 mm x 57 mm


• Weight: 1.1 kg / 2 lbs. 7 oz.

Roland VG-99 Dual modeling Guitar to MIDI Converter

The Roland VG-99 is a milestone in guitar modeling and performance technology. With three powerful new processors at its core, plus expressive performance controls such as Ribbon Controller and D BEAM, this remarkable instrument raises the bar in guitar modeling and performance technology.

The VG-99 contains an incredible range of COSM-modeled guitars and amplifiers including new electric, acoustic and bass guitar models, a new GR-300 synth wave and much more. It even models two signal paths at once. Complete dual processing of guitar modeling on the VG-99 allows you to play two different guitar sounds simultaneously. For example, one virtual guitar could be a Telecaster in a vintage Tweed amp with full effects and the other a nylon-string guitar with just a hint of reverb.

Both modeled guitar and amp paths can be active at the same time, or they can be dynamically switched or blended. You can control the switching behavior between virtual guitars and/or amps by foot controllers, buttons/knobs on the unit, or according to your picking dynamics. Imagine playing softly for an acoustic-guitar sound, then transitioning to a full metal blast simply by picking more aggressively. Furthermore, each modeled guitar can be separately assigned to individual guitar strings. For example, you could have a 12-string guitar on 1st to 4th string and Synth-bass for 5th and 6th.

The VG-99 can produce custom tunings — anything the player desires on any virtual guitar. A virtual Les Paul, for example, could be tuned down four or five steps for a heavy sound, while a nylon string could be tuned as a 12-string, and also tuned down four or five steps at the same time. Open and drop tunings are also supported as well as user-defined custom tunings and can be applied to any COSM guitar, so the player can switch instantly between tuning setups without physically switching guitars or having to manually retune.

With its new performance-based design, the VG-99 can be placed within a player's easy reach on stage by using an optional PDS-10 stand. This new style setup allows various new performance possibilities such as D BEAM, Ribbon Controller and more. In combination with the versatile new foot controller FC-300, the VG-99 takes your guitar performance on stage to a whole new dimension.

You asked for it, now Roland delivers the most-requested new features in the VG-99, including an onboard guitar-to-MIDI converter for direct connection to keyboards, sound modules, soft synths, etc. Audio output via USB or S/PDIF digital out, and optional RAD-99 rack mount adaptor further enhance your music production environment. Built-in stereo XLR and 1/4" outputs are ideal for live stage performances and touring. The striking new on-screen editor makes programming the VG-99 super easy and fun.

Roland VG-99 main features include:

• Dual modeling engines allow guitar and amp models to be dynamically switched, layered and combined


• New COSM electric, acoustic and even bass guitar models, and new synth waves such as the famous GR-300


• Guitar to MIDI converter for direct connection to keyboards, sound modules, soft synths, computers, and other MIDI-compatible devices


• Supports USB audio and MIDI for easy digital recording and sequencing


• Dual GT-Pro-class effects processor enables unequalled flexible tone creation


• Advanced performance controls, including D BEAM, V-LINK and Ribbon Controller take guitar performance to a whole new level


• Simple and intuitive knob-based interface and new design support live performance


• Graphical Editor software included to support sophisticated sound making


• Versatile I/O, including USB, S/PDIF and XLR provide pro connections for virtually every type of music production and performance on stage to professional studio recording

Roland VB-99 V-Bass Modelling System

The Roland VB-99 V-Bass Modelling System delivers three times the sonic firepower of the original model.

The Roland VB99 is based on an all-new custom processing engine and 10 years of research and development. The Roland VB 99 serves up a wide range of inspiring new COSM® bass and amplifier models, powerful polyphonic effects, new string modeling technology, dual independent signal paths for blending sounds, and new controllers. It also features a host of thoughtful improvements that bassists demanded, such as bass–to-MIDI converters, streaming audio via USB, and much more.

The Roland VB-99 V-Bass Modelling System Main Features Include:

• Most advanced bass processor ever


• Dozens of COSM instrument models, including coveted vintage and modern basses, amps, synth basses, effects and even electric guitars


• Converts bass to MIDI and streams audio via USB audio sources


• Dual independent stereo signal paths can be layered or switched: allows two different virtual sounds at the same time


• Allows users to play polyphonic synth bass sounds without tracking issues


• Table-top configuration, rack mountable, or stand mountable


• Stereo XLR, stereo 1/4", MIDI, SP/DIF and USB outputs


• Advanced new real-time controllers: D Beam, ribbon and V-Link


• Dimensions: 384 mm x 218 mm x 94 mm


• Weight: 2.1 kg